【Electronic Grade PCB Protection】This 100ml electronic grade silicone conformal coating is designed for PCB waterproofing, insulation, and circuit board protection. After fully curing, it forms a transparent, flexible, high-insulation protective film that helps shield sensitive electronics, PCB traces, control boards, and electronic modules from moisture, dust, corrosion, condensation, oxidation, electrical leakage, and short circuits while allowing easy visual inspection after application.
【Smooth Flow & Easy Application】Apply an appropriate amount of silicone coating onto the circuit board and allow it to naturally flow and cover the PCB surface. For areas that do not flow evenly or are difficult to reach, use the included brush to spread the coating smoothly over components, solder joints, and fine gaps for more even and reliable coverage.
【Curing Time & Safe Use】The surface usually begins to form a protective cured layer after about 8 hours, but the inner layer may not be fully cured at this stage. Do not power on the electronic device before full curing is complete. Full curing typically takes 18–24 hours, depending on coating thickness and environmental conditions. Placing the coated board in a dry, well-ventilated area can help speed up the curing process.
【Harsh Environment Ready】This silicone conformal coating remains stable and flexible from –22°F to 302°F, helping prevent cracking, shrinking, and aging. It is suitable for circuit boards and electronic components used in indoor, outdoor, humid, hot, or cold environments.
【Wide Application for Electronics & Models】Ideal for PCB circuit boards, LED lighting equipment, control boards, RC electronics, outdoor control boxes, as well as wooden models and other model-making projects that require waterproof protection. As an electronic-grade protective coating, it provides a practical solution for engineers, technicians, DIY enthusiasts, model makers, and electronics repair enthusiasts.
Description
Electronic Grade Silicone Conformal Coating, Waterproof Circuit Board Sealant & Electronic Sealer, Clear Insulating Silicone for PCB, LED Lighting, Electronic Components & Control Boards – Moisture, Dust & Corrosion Protection
340 Silicone Heat Sink Compound 5oz 142g (Dow Corning 340 Non Flowing) Suitable for Thermal Coupling of Electrical Devices and PCB Assemblies to Heat Sinks, Compliant with MIL-DTL-47113
KWD 16.500
PlastiLoka Super Rapida Epoxy Plasticine, 20g, Fast Setting
KWD 5
Refractory Coating - 3056°F High Temperature Refractory Cement Fireproof Dry Mix - for Ceramic Fiber Blankets Lining in Foundry, Forge, Kiln, Smelting Furnace and More (10 LBS)
KWD 11.500
3M Neoprene High Performance Contact Adhesive 1357, Gray-Green, 1 Gallon Can
KWD 66.500
