12V Hydraulic Power Unit Motor - Permanent Magnet DC Pump Motor for Snow Plows, Liftgates, Wheelchair Lifts, and Leveling Systems
Direct replacement 12 volt permanent magnet DC motor for hydraulic power units. Bi-directional forward and reverse operation with CCW rotation. Features 0.614 in (15.6mm) diameter shaft with 1/4 in wide slot drive, two M6-1.0 threaded stud terminals, and 5mm thru-bolt mounting. Single ball bearing construction with intermittent duty cycle.

OEM PART NUMBERS:
Monarch/Bucher: 08053, MH0053, MH08053, 2590112, M2590112, P33939, 500205019833, 208013, M2680100, M2680102, 151604-0088
Mahle/Iskra: 11.212.629, 11.216.237, AME1719, IM0167
Eagle: 1330185
Western: W-8053, W-8054
Waltco: 70092401
Delamerica: 16399, 20813
Leyman: P-33939, AMT-0301, BMT-0320
Thieman: 4423720

SPECIFICATIONS:
Voltage: 12V DC
Power: 0.8kW / 1.07HP
Rotation: CCW (Counter-Clockwise)
Type: Permanent Magnet DC Motor
Operation: Bi-Directional (Forward and Reverse)
Shaft: 0.614 in (15.6mm) Diameter, 1/4 in Wide Slot
Terminals: Two M6-1.0 Threaded Studs (A2=Motor, A1=Ground)
Housing Diameter: 3.11 in (79mm)
Overall Length: 6.54 in (166mm)
Bearing: Single Ball Bearing
Mounting: 5mm Thru-Bolts
Duty Cycle: Intermittent
Weight: 5.1 lbs (2.32 kg)

APPLICATIONS:
Sno-Way ST 22 Snow Plow
Arctic LD78-P, LD84-P with M200 Power Unit
Monarch Hydraulic Power Units
Western Snow Plows
Leyman, Thieman, Waltco Liftgates
Wheelchair Lifts and Leveling Systems

⚠️ Critical: If your motor has 1/4-20 bolts, this unit will not fit. Verify OEM part number before ordering.