Glass reactor
Product Parameters:
Voltage: 110V 60Hz
Power: 90W
Speed: 0-500 revolutions per minute
Speed regulation method: Infinite speed regulation, with speed and temperature digital display function
Interior available capacity of reactor: 10L
Interlayer capacity: 3L
Glass material: GG17 high borosilicate glass
Thickness of kettle body: ≥5mm
Tolerable temperature of reaction kettle body: -100~250˚C (The excessive temperature difference is prohibited.)
Pressure of reaction kettle: -0.098MPA
Use temperature of reaction kettle: -80~200˚C (The excessive temperature difference is prohibited.)
Sealing mode: PTFE mechanical sealing and ceramic bearing
Material of stirring paddle: 304 stainless steel coated with PTFE
Condenser: S-shaped dual coil pipes, ground opening 40/29
Constant pressure funnel: 1L
Backflow bottle: 500ml
Attention
1. Glass pieces with serious stain can be cleaned with dilute sulfuric acid.
2. Check the degree of the sealing ring, and replace the wearing part in time to ensure the vacuum degree of the equipment.
3. Clean the PTFE discharge valve frequently to avoid blockage to the material.
4. During equipment operation, do not touch the transmission device to avoid risks.
5. The firm ground wire must be connected for the power supply.
6. The equipment should be placed on the clean and flat ground, and the brake should be pressed. Be careful to disassemble, clean and move the equipment to avoid the phenomenon that the equipment falls down to be broken and hurt people.
Item Included(220590): 1 x Double-layer Glass Reaction Kettle 10L 110V