Complete Stereo Powered PA Pair — Two DBR12 1,000W Loudspeakers
A pair of Yamaha DBR12 12-inch 1,000W powered loudspeakers — a complete stereo PA ready for mobile DJ gigs, wedding receptions, house-of-worship sound, and small-to-mid venue concerts. Each speaker delivers Class-D bi-amplification driving a 12-inch LF cone and 1.4-inch HF compression driver at 131 dB max SPL, with FIR-X linear-phase DSP tuning and a D-Contour FOH/Monitor switch.
1,000W Class-D Bi-Amp + FIR-X Linear-Phase Tuning
Each DBR12 delivers 1,000 watts of Class-D amplification. Yamaha proprietary FIR-X tuning uses FIR filters at the crossover point — linear-phase behavior across the audio band, time-aligned LF and HF drivers, coherent transients across the crossover region. 52 Hz to 20 kHz frequency range, 90° H x 60° V coverage, 131 dB max SPL.
D-Contour Switch Toggles Between FOH and Monitor Voicings
The D-Contour switch on the back panel of each speaker toggles between two voicings. FOH mode is tuned for front-of-house projection from a pole-mount stand. Monitor mode is tuned for floor wedge use with the speaker tilted toward a performer's ears. One speaker handles both jobs — vertical FOH on stands or tilted floor wedge on stage.
2-Channel Onboard Mixer + Daisy-Chain XLR Mix Out
Each DBR12 includes a 2-channel onboard mixer (CH1 XLR/TRS combo + CH2 XLR/TRS combo with RCA stereo). The XLR Mix Out daisy-chains the mixed signal to a second DBR12 — stereo PA from one source connection, no external mixer required for small setups. 35mm pole socket, M10 fly point, 34.8 lb high-impact ABS cabinet.
Who This Is For
Mobile DJs, wedding and event PA operators, small-venue bands, houses of worship, school auditoriums, and corporate AV. Plug in two power cords, run a source into one speaker, daisy-chain to the second, and you have stereo PA at the venue.