Eyewash:

the Eyewash is a Safety Protection Product. the Eyewash and Shower Equipment Are Emergency Rescue Facilities Used in Toxic and Hazardous Working Environments. When an Accident Occurs, the Eyewash is Quickly Sprayed and Rinsed to Reduce the Damage to a Minimum . Eyewash is a Necessary Equipment for Safety and Labor Protection. It is a Necessary Emergency and Protection Facility for Occasions Where It is Exposed to Toxic and Corrosive Substances Such As Acids and Alkalis.

Important Parameters:

Sealing Pressure: 0.4Mpa

Shower Diameter: 32Mm

Material: Thick+Abs Coating

Spray Flow: 120-180 Liters/Min

Light Source Type: 12L/Min

Working Pressure: 0.2-0.4Mpa

Applicable Conditions: Normal Temperature Water or Water That Meets Sanitary Standards

Installation Method:

the Installation Location Should Be Within 15 Meters of the Accident-Prplace, and It Can Reach the Impact Within 10 Seconds at a Running Speed.

Wash Place.

Wrap the Sealing Tape at the Connection of Each Part, Connect the Water Pipe and

after Connecting the Inlet and Outlet Pipes, Check Whether the Ball Valve Switch is Flexibly in Place and Whether There is Jamming.

Instructions:

Before Use, Open the Water Inlet Control Valve

When Washing Your Eyes, Please Push the Push Plate of the Eyewash Switch in a Clockwise Direction, the Eyewash Valve Opens, and Press the Counterclockwise

Pull Back the Push Plate in the Direction of the Needle, and the Eyewash Valve Closes.