بحث

بحث

بيت / Foyods / توصيلات
10 قطع تركيب غطاء صمام ضغط 3/8 بوصة، غطاء نحاسي مع غسالة إغلاق، غطاء لأغطية خط المياه، أغطية السباكة لصنبور المرحاض، أغطية خرطوم مرن لمدخل المياه 3/8 بوصة، صمام إغلاق خط الإمداد in Kuwait 10 قطع تركيب غطاء صمام ضغط 3/8 بوصة، غطاء نحاسي مع غسالة إغلاق، غطاء لأغطية خط المياه، أغطية السباكة لصنبور المرحاض، أغطية خرطوم مرن لمدخل المياه 3/8 بوصة، صمام إغلاق خط الإمداد in Kuwait 10 قطع تركيب غطاء صمام ضغط 3/8 بوصة، غطاء نحاسي مع غسالة إغلاق، غطاء لأغطية خط المياه، أغطية السباكة لصنبور المرحاض، أغطية خرطوم مرن لمدخل المياه 3/8 بوصة، صمام إغلاق خط الإمداد in Kuwait 10 قطع تركيب غطاء صمام ضغط 3/8 بوصة، غطاء نحاسي مع غسالة إغلاق، غطاء لأغطية خط المياه، أغطية السباكة لصنبور المرحاض، أغطية خرطوم مرن لمدخل المياه 3/8 بوصة، صمام إغلاق خط الإمداد in Kuwait 10 قطع تركيب غطاء صمام ضغط 3/8 بوصة، غطاء نحاسي مع غسالة إغلاق، غطاء لأغطية خط المياه، أغطية السباكة لصنبور المرحاض، أغطية خرطوم مرن لمدخل المياه 3/8 بوصة، صمام إغلاق خط الإمداد in Kuwait 10 قطع تركيب غطاء صمام ضغط 3/8 بوصة، غطاء نحاسي مع غسالة إغلاق، غطاء لأغطية خط المياه، أغطية السباكة لصنبور المرحاض، أغطية خرطوم مرن لمدخل المياه 3/8 بوصة، صمام إغلاق خط الإمداد in Kuwait

10 قطع تركيب غطاء صمام ضغط 3/8 بوصة، غطاء نحاسي مع غسالة إغلاق، غطاء لأغطية خط المياه، أغطية السباكة لصنبور المرحاض، أغطية خرطوم مرن لمدخل المياه 3/8 بوصة، صمام إغلاق خط الإمداد

KWD 4
ماركة
Foyods
وزن
46 g
– 1 +

مميزات خاصة

  • 10-Piece Comprehensive Sealing Kit: Includes 10 solid brass 3/8 compression caps and 10 matching gasket washers for 3/8 compression cap. Specifically designed to securely seal off unused 3/8 water caps or lines on shut off valve caps for sinks, toilets, and kitchen appliances.
  • [Important] Sizing & Compatibility Guide: These are 3/8" Compression fittings, NOT 3/8" NPT or 3/8" Flare. Please verify your 3/8 in stop valve fitting cap or supply line size before ordering to ensure a perfect fit for your toilet water inlet flex hose cap. 
  • Instant Leak-Proof & Tool-Free Seal: Each 3/8 compression cap with seal creates a watertight barrier the moment you tighten it. The 3/8 compression cap with washer design eliminates the need for messy Teflon tape, providing a reliable compression valve cap solution that saves time as an ice maker brass cap or dishwasher seal.
  • Simple 3-Step Installation: 1. Ensure the water is off. 2. Place the rubber gasket inside the 3/8" compression cap for water line. 3. Hand-tighten onto the valve or pipe, then give it a 1/4 turn with a wrench. Ideal for use as a temporary toilet inlet valve cap or bidet valve cap during maintenance.
  • Heavy-Duty & Renovation Safe: Crafted from premium brass, these plumbing water line caps resist corrosion and high pressure. Use them as caps for shutoff values or a 3/8 shut off valve cap to safely isolate specific lines without shutting off the main water supply, keeping your 3/8 dishwasher caps and other fixtures secure.

وصف

Technical Specifications & Fitment Guide:
In the plumbing industry, names can be confusing. Our 3/8" Compression Valve Caps are specifically crafted for the standard angle stop valves found in most North American homes. To avoid the common mistake of buying the wrong size, please follow this measurement guide:
How to verify your fit:
Use a caliper or ruler to measure the Outer Diameter (OD) of your valve's male threads. If your measurement is approximately 9/16 inches (which is 1.43 cm or 14.3 mm), then our 3/8" Compression Cap is the perfect fit. Please note that this product will NOT fit 1/4" threads (1.11 cm), 1/2" FIP threads (2.13 cm), or standard 7/8" toilet fill valves.
Why does my 3/8" Valve measure 9/16"? (Understanding Plumbing Sizes)
We know plumbing measurements can be frustrating. The most common mistake is thinking 3/8" means the thread is 3/8" wide on a ruler.
The Industry Name: 3/8" Compression is the name of the fitting.
The Physical Reality: The actual male thread on your wall valve (angle stop) measures 9/16 inches (which is exactly 1.43 cm or 14.3 mm).
The Solution: If your ruler shows ~1.43 cm, our 3/8" Compression Cap is the perfect, intended match.
How to Install in 3 Easy Steps:
Step 1: Confirm your male valve thread OD is 1.43 cm (9/16").
Step 2: Place the included rubber gasket inside the brass compression valve cap.
Step 3: Hand-tighten the 3/8 in stop valve fitting cap onto the valve, then use a wrench for an extra 1/4 turn to lock the seal.
Fitment Checklist:
Fits: Standard North American Angle Stop Valves (3/8" Compression).
Does NOT Fit: 1/2" FIP (2.1 cm), 1/4" Compression (1.1 cm), or 7/8" Toilet Fill Valves.
Commonly Used For (Typical Applications):
This 3/8" cap is the standard size for sealing off water lines on the following household fixtures:
Kitchen & Bathroom Sinks: Shut-off valves (angle stops) located under the cabinet.
Dishwashers: Capping the dedicated supply line when the appliance is removed.
Toilets: The water inlet valve on the wall leading to the toilet tank.
Ice Makers & Refrigerators: 3/8" water supply lines for fridge water dispensers.
Bidets: Sealing off the 3/8" side port on a T-adapter valve.

منتجات شبيهه

{"error":"\u062e\u0637\u0623","cart_limit":"\u0644\u062f\u064a\u0643 \u0627\u0644\u0643\u062b\u064a\u0631 \u0645\u0646 \u0627\u0644\u0645\u0646\u062a\u062c\u0627\u062a \u0641\u064a \u0633\u0644\u0629 \u0627\u0644\u062a\u0633\u0648\u0642 \u0627\u0644\u062e\u0627\u0635\u0629 \u0628\u0643.","prod_limit":"\u0644\u0627 \u064a\u0645\u0643\u0646\u0643 \u0625\u0636\u0627\u0641\u0629 \u0627\u0644\u0645\u0632\u064a\u062f \u0645\u0646 \u0647\u0630\u0627 \u0627\u0644\u0645\u0646\u062a\u062c"}