مميزات خاصة

【Precise Temperature Control】: Equipped with a microcomputer PID temperature control system, it features a fast response and high stability, with a measurement accuracy of up to 0.05/ K. It can quickly remove the moisture adsorbed on the surface of various plastic particles, effectively avoiding quality defects such as bubbles, white spots, and insufficient strength during subsequent injection molding and extrusion processes
【Strong Power】: Equipped with high-power electric heating tubes and high-quality pure copper core fan motors, the total drying and heating power reaches 4KW, which enables rapid heating and significantly shortens the preheating and drying cycles. Combined with a 50kg large-capacity stainless steel barrel design, it easily meets the batch production demands of large, medium and small-sized plastic processing plants and injection molding workshops
【Over Temp Protection】: Equipped with dual high-temperature protection mechanisms, the system will automatically issue an alarm when the temperature is abnormally high. If it continuously exceeds the set value of the protector, the heating will immediately stop
【Energy Conservation & Heat Insulation】: It adopts a double-layer stainless steel insulated bucket structure, with a smooth inner wall and an outer layer that effectively blocks heat loss, significantly reducing energy consumption. In combination with a copper core fan motor that generates low heat and operates smoothly, it not only maintains a stable temperature but also achieves low energy consumption during long-term continuous drying work
【Convenient Design】: Equipped with a clear and intuitive operation panel. The green start and red stop buttons, combined with the function direction keys, make parameter adjustment simple and easy to handle. The openable material door with a visual window enables direct observation of the drying status of the material at any time. The funnel-shaped smooth discharge port has no dead corners and does not clog materials

وصف

Overview:
The plastic dryer is a commonly used hot air drying device in the plastic processing industry. This machine adopts a double-layer insulated sealed structure and a high-power hot air circulation system, featuring precise and stable temperature control, fast drying speed, uniform heating, minimal heat loss, and low energy consumption. It quickly removes surface-adsorbed moisture from various plastic pellets and chips, preventing quality defects such as bubbles, white spots, and insufficient strength in finished products after subsequent injection molding or extrusion processes. It is suitable for drying pretreatment of a wide range of plastics including PP, PE, ABS, PVC, and more. Widely applicable in small, medium, and large plastic processing plants, injection molding workshops, modified plastic production enterprises, and other processing facilities of various scales, this dryer meets the continuous drying demands of batch production.

Product Parameters
Voltage: 220V
Frequency: 60Hz
Phase number: Three-Phase
Capacity: 50kg (110.2lbs)
Drying Heating Power: 4kW
Fan Power: 0.16kW
Temperature Range: -40 ~400 (-40 H~752 H)
Measurement Accuracy: 0.05 /K
Working Environment: -10 ~60 (14 H~140 H) 85%RH non-condensation
Storage Environment: -20 ~70 (-4 H~158 H) 85%RH non-condensation
Barrel Material: Stainless Steel

Item Included:
220V 3PH European-Style Plastic Drying Machine 50KG *1

مرحبًا،

بحث

مميزات خاصة

وصف

منتجات شبيهه