2026 Upgraded Electric Door Strike Lock ANSI Standard Fail-Secure/Fail-Safe Door Strike Lock for Access Control System,Cylindrical/Mechanical Locksets Strike Lock (Input Voltage 12VDC)
APPLICATION: Electric strike door lock can be used in door access control system, cylindrical locksets,mechanical locksets.This electric door latch can be used to convert cylindrical lock sets into an electronic access controlled locking system.
TWO MODELS: You can set the operation mode of Fail Safe(NC) or Fail Secure(NO). Loosen the screw and tighten it in the other hole to switch the mode Fail Safe:When power off,the door is in the open status. Fail Secure: When power off the door is in the closed status.
MAXIMUM IMPACT STRENGTH: Door strike lock is made of high-quality alloy metal with a service life exceeding 500,000 times and a locking force of up to 2200 pounds (1000 kilograms).
SOLVING THE PROBLEM: Since the power supply of the electric strike door lock is made of aluminum and is used for a long time, it may cause insufficient power. This is not necessarily a problem with the ANSI standard strike lock. You can try replacing the power supply. If the coil is not burned out, you can use a dry cloth to remove the dirt on it.ufficient power. This is not necessarily a problem with the ANSI standard strike lock. You can try replacing the power supply. If the coil is not burned out, you can use a dry cloth to remove the dirt on it.
ATTENTION: Before ordering, please check the size of door's frame to avoid wrong purchase! Sincerely hope that our electric strike door lock can bring security to you and your assets. If you have any problem, we will be help you within 24 hours