Product Description：

This 680 Green Anaerobic Retaining Compound delivers reliability when connecting and installing cylindrical components.
Designed for room for temperature curing, its high-strength, high-viscosity formula forms a bond in just 10 minutes, supporting a shear strength of 4,000 psi.
It effectively fills gaps up to 0.015 inches (0.38 mm) in diameter, making it easier to achieve secure assemblies even when machining tolerances are relaxed.
This compound enables you to replace clamp rings, set screws, and snap rings by delivering robust resistance to dynamic, axial, and radial forces on your components.
Especially useful for fixing shafts, gears, pulleys, and a variety of cylindrical parts, it also excels in sliding fit applications.
Color: Green
Curing type: Anaerobic curing
Maximum radial for clearance (inch): 0.015
Fixture time: 10 minutes
Full cure for temperature (°C): 25
Full cure for temperature (°F): 77
Full cure time: 24 hours
Gap filling capacity (inch): 0.015
Key feature: High strength bonding
Shear strength, steel (psi): 4000
Specific gravity (g/l @ 25°C): 1.1
for temperature range (°C): -54 to 149
for temperature range (°F): -65 to 300
Viscosity (Brookfield mPa.s (cP)): 4000
Application viscosity for temperature (°C): 25
Application viscosity for temperature (°F): 77
This anaerobic is packaged half full to allow for air space, lasting product stability during storage.

Package list:

1*Anaerobic glue