Tekton 1/4 inch drive stubby ratchets fit where others can't. The drive tang at the end of the handle lets you attach an extension or other 1/4 inch drive accessories. It pairs well with a 3 inch extension to increase the handle length for reach, leverage, or a better grip. Connect the ratchet to the 1/4 inch drive square on the end of the aluminum spinner handle for a comfortable grip. Add a bit holder to drive 1/4 inch hex shank bits in confined spaces. The non-locking joint gives the head a continuous 180-degree range of motion. It has just the right amount of tension to hold any position without flopping over. The 90-tooth gear results in a 4-degree swing arc. The single half-moon pawl maintains 9 teeth engaged with the gear at all times, ensuring that it won't slip or skip under stress. Unlike conventional "low profile" designs that focus on controlling only the thickness of the head, we reduced the size in every dimension: height, width, and length. The handle is kept as short as possible while still providing meaningful leverage in tight spaces. A defined finger groove provides control, and the flared end helps keep your grip secure.