Motion Raceworks TWIN Wastegate Turbocharged CO2 Kit - The Motion Raceworks Twin Wastegate CO2 Kit takes the guess work out of fittings. This all-inclusive kit comes with top quality fittings, regulator, line, and bottle to plumb any Boost Controller system on the market. - The CO2 regulator comes preset at 80 psi which is appropriate for nearly every setup (the boost controller regulates pressure down from there). Our nickel-plated fittings are 1/8 NPT which work with nearly every brand wastegate, blow off valve, and solenoid on the market. This kit includes: (8) 90° Nickel-Plated Push-to-Connect 1/8" NPT Fittings; ​(3) Straight Nickel-Plated Push to Connect 1/8" NPT Fittings; (2) Nickel Plated Push to Connect T Fittings; (1) Sensor T (Male, Female, Female) 1/8" NPT for Dome Pressure Sensor on Wastegate; (1) 2.5 lb Aluminum CO2 Bottle; (1) Adjustable CO2 Regulator with Bottle Pressure/Line Pressure Gauge; (20 ft) Black Push To Connect Line. - Recommended Plumbing for CO2 Wastegate Control: For twin wastegates, simply T the line going to the top of the wastegate and run to second wastegate. Also, T the line going to the bottom of the wastegate and run to bottom of second wastegate. - ***Note: These bottles are only date certed. We cannot and will not guarantee they meet any regulations outside of the United States as every country has their own regulations.***