Inner tubes of 100/90/65-6.5 specification
Core parameters
Product Name: Special Inner Tube for Electric Scooters (Compatible with multiple sizes such as 100/90/65-6.5)
Key dimensions: Inner diameter 16cm, outer diameter approximately 28cm, width 6.1cm
Weight: Net weight 0.175kg (175g)
Adaptation range
It can replace the original inner tubes of 100/65-6.5, 80/65-6.5 and 110/50-6.5 sizes, and is compatible with vehicle models marked with the above tire sizes (such as Apollo Explore, Kaabo Wolf King GT, etc.). ​
Core advantage
Upgraded stainless steel valve stems: 30% harder than copper models, resistant to deformation, rust and air leakage
1.5mm thickened butyl rubber: It is more resistant to the impact of crushed stones and has better air tightness than the 0.9mm ordinary inner tubes on the market
Detailed installation method
Pre-treatment: Thoroughly clean the inner wall of the outer tire with a clean brush to prevent impurities from damaging the inner tube
Air leak check: First, fill the inner tube with a small amount of air (to allow it to slightly form), and then fully immerse it in clean water
Check for bubbles: Slowly rotate the inner tube and carefully observe if there are any bubbles emerging. If there are no bubbles, it can be installed