Turbowerx Exa-Pump Turbo Oil Scavenge Pump TWX-300-12V-10AN | Exa-Pump Ultra High-Performance Electric Scavenge Pump | Turbo Werx Pumps are made to work with 12v all the way up to 18v systems. This makes it ideal for both 12- and 16- volt racecar battery systems. | An Industry First. The TurboWerx Exa-Pump is the ultimate achievement in high-temperature, high-reliability pump technology. This pump was designed from the ground up to handle the most extreme conditions found in any motor vehicle, with a special emphasis on turbocharger oil scavenging applications. Built on extremely rugged spur gear technology, there is simply no other pump that can be compared to this hi-temp, 10,000 hour continuously rated pump. Aerospace/military-grade quality finally available...and at an affordable price. The specifications and materials explain why the Exa-Pump remains #1: (12 VDC AND 24 VDC VERSIONS IN STOCK! INQUIRE ABOUT CUSTOM VOLTAGES AND FLOWS.) 24V version - Perfect for European, and Commercial/Heavy-equipment/Truck Markets; 350F (175C) Fluid Temperature; 2-3GPM Scavenge Pump Rate depending on oil temperature/viscosity, 50+ PSI continuous as Pressure Pump; Self-prime greater than three feet; Hardened Bronze Gear Pump Rotors; 10,000 Hour Rated Dual Hybrid Ball Bearings; 10,000 Hour Rated Over-Sized Brushes; Highest Rated Temperature (class H or higher) Insulated Copper Motor Windings; Black Anodized Extruded Aluminum Bracket/Heatsink; Nickel-plated Pump Head; Stainless Steel Pump Head Fasteners; 3/8" NPT Female Threaded Pump Head Ports; Set of two 3/8” NPT -> -10AN Nickel-plated Adapters Included; High-Temperature Power Wiring; Weatherproof Connectors; Rubber-isolated Mounting Bracket; Low-vibration, Quiet; 6 lbs Total Weight, 3” Diameter Motor - For the most weight/space-critical applications, see our newly announced Exa-Pump “Mini!”; Reversible Pump Flow via Power Polarity Reversal; Not designed for use as a fuel pump; Rated voltage may be exceeded by up to 25%; For 100% compatibility with 16-18V set-ups on race vehicles, choose the 24V Exa-Pump; Operating Current: 12 VDC version is 3/8NPT fittings included for convenience. | Hi-Temp Wiring. High-temperature rated wiring to support extreme environments. | Weatherproof Connectors. Standard GM WeatherPack connectors. | Rubber-isolated Mounting Bracket. Exa-pumps use a strong steel bracket with rubber isolation mounts with an industry standard footprint for easy upgrading of existing systems. | Low-vibration, Quiet. The pump head gears are precision, angle cut. The gears are sized to reduce the motor's RPM. This results in much quieter operation, with far less vibration than the competitors. | Power Requirement: The pumps have a wide operating range of 0% to 125% (25% over) of rated (nominal) voltage. All specifications assume a nominal Voltage. Current requirement for 12 VDC version is typically