This tool is designed for quick removal of the valve spring without removing the cylinder head, facilitating valve spring removal or valve stem seal replacement on many cars, vans and light trucks.
Valve spring compressor suitable for valve spring seats with a diameter of up to 1-13/16 inches; jaw opening is 1-3/8 to 5-5/8 inches; throat clearance is 5-7/8 inches.
The valve spring compression tool is a professional valve spring removal tool, very suitable for removing valve springs and spring retainers.
How to Use: Simply adjust the opening of valve seal removal tool according to the diameter of the spring, snap the double jaws horizontally onto the valve spring, turn the metal knob on the top of the tool clockwise and the spring will be compressed.
The valve compressor tool is made of heat-treated carbon steel, which is strong, pressure-resistant and rust-resistant. The knob at the top is easy to grip and rotates smoothly to provide sufficient leverage for spring compression.

Features:

1.The valve spring compressor made of quality Carbon Steel, sturdy and durable carbon steel material with zinc and black oxide finish, good bearing.

2.This strut spring compressor features double ended jaws with attachable security hooks for added safety and control.

3.The spring compressor strut compressor works on most passenger and light commercial vehicles. Offset jaws easily grip and compress valve springs.

Easy to Use:

1. Always wear eye protection and park the vehicle in neutral while working with this tool.

2. Loosen tool to open the jaws by turning the dial adjustment, then align jaw hooks onto the coils of the spring.

3. Begin tightening the dial adjustment to compress the spring allowing you to remove the keepers.

4. Then simply release the valve compressor to remove the spring.

Note: Not suitable for deep-valve engines, please check if your car spring diameter is less than or equal to 1.2 inches.

مرحبًا،

بحث