Hoses
Our hose assemblies are an inexpensive alternative to the more costly braided hose kits. This set adapts an 1982-1988 T-/ type rack or our 91034340-POW rack to a style pump. Return hose will normally need to be cut to length.
The pressure line in this kit has a 5/8"-18 male inverted flare fitting at the pump end along with a -6AN to an 9/16"-18 -14mm-1.5- male O-ring fitting on the rack end. Note this is an O-ring style sealing design, and not an inverted flare sealing style. It also includes an adaptor so that it work with an O-ring style -metric- pump fitting. We suggest using pump or.
Kit includes:
Adapter for the pump, to allow it to work with both metric O-ring and inverted flare style threads on the pump fitting.
The included fittings that will install into the 1982-1988 T- type rack which are 9/16"-18 -14mm-1.5- O-ring -high pressure- and 5/8"-18 -16mm-1.5- O-ring -low pressure return- with the smaller O-ring fitting hose end being the pressure side for the rack.
Inverted Flare Adapter
If you have a pump using late model style O-ring hoses that you need to adapt to traditional inverted flare hoses, this inverted flare adapter is a simple fix. Simply insert the adapter into the flow fitting and then install your inverted flare hose.
Use to convert from 16mm o-ring to 5/8" inverted flare style.