Resistor Units
4 Sets Resistance Load Resistor 25W/50W For LED Lights Aluminum Shell Power Resistors 12V 6ohm 8ohm 10ohm for Car Turn Bulbs
This resistor is only suitable for 12V models, not for 24V trucks.
Usually a lamp needs a resistor
LED car tail light aluminum shell resistance:
1. High power and small volume.
2. Extremely high accuracy and high voltage resistance.
3. Strong stability, sturdy
4. beautiful appearance.
5. Waterproof and excellent heat dissipation.
Generally used in LED car taillights, frequency converters, car braking equipment, and industrial control equipment on large power supplies. The LED car aluminum housing resistor is used to adjust the flashing speed of LED lights
Description:
1.After changing the installation of LED lights, the car's trip computer will show that there is a problem with the newly installed LED lights, etc.
2.In order to solve this problem, the installation of this product can solve the phenomenon of false alarms due to the installation of LED lights in the driving computer car.
3.When using a resistor to solve the stroboscopic, all the turn signals (the small side lights do not need to install a resistor) change the LED turn lights, you must install a resistor.
4.It is recommended to use 25W for small lamps with low current demand such as turn signals, reversing lights, rear fog lights, indicator lights, daytime running lights
5.It is recommended to use 50W for brake lights, front fog lights (change to surround), and other light bulbs with large current requirementsInstallation is easy! Put the wire into the button hole of the wire clip, press the button, and then fix the resistor body and it's OK. It's that simple! Can solve the problem of false alarms, false alarms, and stroboscopic (connect resistors in parallel to the positive and negative poles of the alarm stroboscopic bulb)
Package List : 4 resistors+8 clips = 4 set
Common problem:
Question 1: What car model can this decoder be suitable for?
Answer: This decoder is suitable for 12V sedans, business vehicles, or off-road vehicles, such as and other sedans with on-board computers, but not suitable for 24V trucks.
Question 2: Which bulb position can this decoder be installed in?
Answer: This universal decoder can be installed on the circuit of reversing lamp, brake lamp, front fog lamp, rear fog lamp, turn signal lamp, etc.
Question 3: What is the working principle of this decoder?
Answer: The working principle of the decoder is to increase the working power in the circuit, simulate the power of the car circuit, and achieve the purpose of detecting through the driving computer circuit.
Question 4: Does this decoder generate a lot of heat?
Answer: Decoder heating is a normal phenomenon and will not affect its normal A normal light bulb also generates a lot of heat, but it is not normal if it does not generate heat.
Question 5: What else should I pay attention to when installing this decoder?
Answer: Please fix the decoder on an iron frame or other metal parts suitable for heat dissipation, and it can also be suspended and fixed. Please do not allow the decoder to come into direct contact with the wires inside the car because the metal shell dissipates heat quickly and may melt the plastic on the outer layer of the wires.
==========
Accuracy : 5%
Volume : 0402
Color : WHIT E,Yellow,Red
Rated Power : 25W 50W
Resistance Tolerance : 5
Package Type : Surface Mount
Technology : Metal alloy
Type : Wirewound Resistor
keyword 1 : 50w 6 ohm
keyword 2 : Replacement resistors for car airbag repair
keyword 3 : Aluminum Power Metal Shell Case Wirewound Resistor
keyword 4 : Car Load Resistor
keyword 5 : LED Decoder
keyword 6 : 25W LED Reverse Brake Turn Signal Light Load Resistor
keyword 7 : 6 ohm resistor
keyword8 : 50w resistor
keyword 9 : load resistor
keyword10 : resistor for turn signals
keyword11 : resistor for led lamps
keyword 12 : led resistor