[AVR RECTIFIER FOR 178F/186F] Automatic voltage regulator and rectifier designed for Kama diesel generators with 178F or 186F engines, providing stable voltage regulation and supporting battery charging during operation.
[RESTORES BATTERY CHARGING] Intended to recover charging function when the battery cannot be charged or the generator shows no output; swapping this component is a common remedy for those symptoms.
[LIGHTWEIGHT ALUMINUM BODY] Constructed from aluminum in a grey finish to help disperse heat and withstand engine bay conditions; compact profile suits tight installation spaces.
[SAFETY & CHECKS BEFORE FITTING] Verify engine model and connector layout, disconnect battery prior to replacement, and follow standard safety steps in your generator manual to complete installation safely.
[RESTORES BATTERY CHARGING] Intended to recover charging function when the battery cannot be charged or the generator shows no output; swapping this component is a common remedy for those symptoms.
وصف
Features:
* This is an engine voltage regulator, AVR (Automatic Voltage Regulator) and rectifier.
* This voltage regulator is usually installed on the engine to charge the battery.
* If your generator has no output and/or the battery cannot be charged, it is very likely that this component needs to be replaced.
* This regulator has 2plugs and a total of 3 wires.
* You must for ensure that your generator is also connected in the same way.
Specification:
Part Name: Voltage Regulator
Material: Aluminum
Colour: Grey
Size: As shown in the figure
Note: Our 12V voltage regulator has three wires: two blue or green wires for the AC voltage input of the flywheel generator, and red wire for the DC voltage output to the 12V DC battery.
The embedded circuit is internally grounded to the component housing as the for fourth grounding wire. It is equivalent to a 4-wire 12V voltage regulator.
Package contents:
1 x voltage regulator
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.