Fitment
for Toyota
for Tacoma 2.4L/2.7L/3.4L 2001-2003

Item Offered
Items included: mounting hardware

Material
Alloy steel

Position
Location: front,inner,lower,upper,right,left

Part Number
K90261,EV409,K90256,K90704,EC81298201,K90260,K90705,K90257

Ball Joint Replacement Guideline
Reinstall front wheels. lower the vehicle and tighten the wheel studs to the tightening torque specified by the vehicle manufacturer
Measure the chassis and adjust it using the many holes on the compression ball joint if necessary
1.how will i know that i have to my ball joint parts or replace them
2.what happens if a ball joint breaks
If the ball joint breaks completely,it can be separated,and things can turn sour quickly. the wheel will stop being nice and can even steer you off the road. it can be serious
3.are worn ball joints dangerous
Yes,it can be quite dangerous. because,a worn ball joint causes suspension damage,inspection failure,and breakage of related parts
It might make your front suspension come apart while driving,so the wheels move in whatever direction inertia takes them. that can lead to a fatal accident
4.what happens if i don't replace ball joints
5.do i need to grease new ball joints

Frequently Asked Questions
1.what are the symptoms of a bad sway bar
2.what happens when a sway bar breaks

Tie-Rod End Replacement Guideline
This useful tip applies to the exchange of tie rod ends and inner tie rods,which together form the so-called tie rodlift the vehicle and dismount the front axle wheels
Dismount the front underride guard
Push the bellow towards the tie rod end
Screw the new inner tie rod into the rack and tighten it with the tightening torque that has been specified by the vehicle manufacturer