Fitment
for Honda
for Odyssey 3.5L 1999-2004

Item Offered
Items included: mounting hardware
Kit parts included: sway bar,outer tie rod

Material
Alloy steel

Position
Location: front,left,right,lower

Part Number
ES3669,53540S0XA02,K90349,51320S0XA02,K90359,53540S0XA01,51350S0XA02

Ball Joint Replacement Guideline
Reinstall front wheels. lower the vehicle and tighten the wheel studs to the tightening torque specified by the vehicle manufacturer
Measure the chassis and adjust it using the many holes on the compression ball joint if necessary

Frequently Asked Questions
1.do i need to replace the control arm if the Bushings are worn
2.what happens if a ball joint breaks
If the ball joint breaks completely,it can be separated,and things can turn sour quickly. the wheel will stop being nice and can even steer you off the road. it can be serious
3.what happens if i don't replace ball joints
4.do i need to grease new ball joints
5.why should i get my tie rods inspected on a basis
6.vibrations
7.shaking
8.wandering
9.what are the symptoms of a bad sway bar
10.what happens when a sway bar breaks

Tie-Rod End Replacement Guideline
This useful tip applies to the exchange of tie rod ends and inner tie rods,which together form the so-called tie rodlift the vehicle and dismount the front axle wheels
Dismount the front underride guard
Push the bellow towards the tie rod end
Screw the new inner tie rod into the rack and tighten it with the tightening torque that has been specified by the vehicle manufacturer
Secure the ball joint in the steering knuckle and mount the nut. please observe the tightening torque suggested by the vehicle manufacturer
14.mount the front underride guard