Car-mounted heater instructions

Product functions：
1. Portable car heater has both natural and warm air functions. Switch position: FAN, natural air;OFF. turn off; HEAT, warm air.
2. This car-mounted heater puts cigarette lighter in the smoke hole of the car (12V). It can be turnedon when power on, and the FAN can circulate the air inside the car. When itis switched to the HEAT, PTC gets heated rapidly and generate warm air. The temperature of the air outlet reaches about 80-90 degrees, which can quickly heat the interior space. When the window glass is heavily fogged, hold it to blow on the foggy spot to remove the fog (the second gear of upgraded model has air purification function).
3. Fix the heater base in a certain position of the car with a double-sided adhesive tape, and then turnon the power and use it normally. The angle of the air outlet can be adjusted up and down by about 80 degrees, and left and right by 360 degrees. The base can be unmounted when car window defogging, blow the fog directly with the heater body.

EAQ and warnings
For better use of the heater, please note the following notes:
1. The heater is a high-power electrical appliance for vehicles, and its working current is relatively large (12.5A or so), so it cannot work for a long time (30-60 minutes). Do not use during engine shutdown in case the storage battery runs out of power.
2. If there occurs sudden shutdown after a few minutes of power-on, this is caused by the current shortage of current protection of the cigarette holder, but not a product problem. It can be normally used if the current of protector reaching 15A, otherwise it cannot work with current less than 12A.
3. If there is heat in air outlet but no air blowing out (no fan running sound) or there is plastic burnt smell, cut off the power supply immediately and stop using.