مميزات خاصة

FITMENT: Compatible with 1992-1998 BMW E36 — 318i, 318is, 318ic, 318ti, 323is, 325i, 325is, 328i, 328is, and M3. Includes 4 rear subframe plates, 2 rear shock tower plates, 2 trailing arm pocket plates, and 2 rear sway bar plates. 10 pieces total. All weld-in installation
ADDRESSES THE MOST EXPENSIVE E36 CHASSIS FAILURE: The E36 rear subframe crack is one of the most well-known and costly failures on the platform — the rear subframe tears away from the chassis body at predictable locations under hard use. Condor's rear combo addresses the rear subframe with 4 weld-in plates plus covers the shock towers, trailing arm pockets, and sway bar mounts for complete rear chassis reinforcement
10-PIECE REAR COVERAGE — SUBFRAME, SHOCK, TRAILING ARM, AND SWAY BAR: 4 rear subframe plates reinforce the attachment points most prone to cracking and separation. 2 shock tower plates handle the repeated cornering loads at the rear shock mounts. 2 trailing arm pocket plates reinforce where the rear trailing arms attach to the chassis. 2 sway bar plates cover the rear end link mounts
FOR EVERY E36 THAT SEES HARD USE — PREVENTATIVE OR REPAIR: Whether you are reinforcing a chassis before failure develops or welding over an existing crack, this kit covers the complete rear story. Does not fit 318ti. Weld-in by a qualified welder required. Pair with our front combo or buy the complete kit for full chassis coverage
MADE IN USA — LIFETIME WARRANTY: Precision cut and manufactured by Condor Speed Shop in South Florida. 17+ years racing E36 chassis and watching exactly where the rear chassis fails under endurance race loads. We built this kit because of what we saw

وصف

Prevent the E36 rear subframe failure before it costs you a car.

The E36 rear subframe crack is one of the most common and expensive chassis failures on the platform — the subframe tears away from the chassis body at predictable locations under sustained hard use. Condor's 10-piece rear combo targets every vulnerable location in the rear chassis: the four rear subframe attachment points, the shock towers, the trailing arm pockets, and the sway bar mounts.

Includes: 4 rear subframe plates, 2 rear shock tower plates, 2 trailing arm pocket plates, 2 rear sway bar plates. 10 pieces total. Does not fit 318ti. Weld-in by a qualified welder required.

For track cars, race builds, and any E36 with consistent hard use. Works as preventative reinforcement or repair. Pair with our front combo for complete chassis coverage.

Made in the USA. Lifetime warranty. Condor Speed Shop — 17+ years racing E36 chassis and building the parts that keep them together.

Compatible with 1992-1998 BMW E36: 318i, 318is, 318ic, 318ti, 323is, 325i, 325is, 328i, 328is, M3. Does not fit 318ti.

مرحبًا،

بحث

إي 30

مميزات خاصة

وصف

منتجات شبيهه