Fitted to the outer edge of the wheel, Rimskins provide a barrier between the wheel rim and the kerb. Rimskins are intended to be a sacrificial product that will go on protecting the rims after many scrapes.
1. Ensure the ends of the Rimskins have been cut off squarely.
2. Peel 10cm of orange backing strip from adhesive strip.
3. Apply Rimskins from the top of the wheel rim and proceed in a clockwise direction, removing the backing strip as you go. Avoid direct contact with tape surface.
4. When application is complete, use scissors or a sharp blade to trim Rimskins to the correct length.
5. Firmly press Rimskins onto the rim.
6. To clean, wipe over with wax and grease remover and cloth.
Note: The adhesive used on Rimskins requires 24 hours to fully cure but is suitable for immediate use. Suitable for up to 20" rims