Partall Film #10 is a water/alcohol-based polyvinyl alcohol (PVA) release agent that forms a barrier between parts and surfaces that are still curing (green or recently reconditioned moulds can be reactive)
Partall Film #10, is resistant to solvents and styrene yet is water soluble. Protects against mould hang ups with polyester and vinylester resins; also used with epoxy and urethane resins.
PVA is most commonly applied over mould release wax although some users find success by adding wax over the PVA film (giving a second part cycle before replacing PVA.)
Partall Film #10 can also be used as a surface cure agent during gel coat repairs (locks out moisture in the air that inhibits resin cure).
Now improved for easier lay out Same PVA as the green but this is clear
وصف
PARTALL Film #10 is a water and alcohol based polyvinyl alcohol (PVA) coating comprised of solvent-resistant, film-forming materials. Once dry, the PVA film is resistant to solvents in the resin system used to make composites parts but is soluble in water. It is particularly recommended as a parting agent for separation between polyester, vinylester, or epoxy resins and various surfaces but may be used with most thermoset resins. PARTALL Film #10 is not recommended for use with substrates or resins (e.g., phenolics) containing water or giving off water during cure or with automotive finishes. PARTALL Film #10 parts easily from surface and is readily dissolved from parts and spray equipment with water.
