مميزات خاصة

Important Size: Our car coil spring spacer has an ID of 4.56 inch, an OD of 6.41 inch, an overall height of 2.37 inch, and a height of 1.18 inch at the rail, note that it is only suitable for springs with a pitch of 1.5 inch, please check the size before buying
Cushioning: Our car spring spacers for cars, with their cushioning advantages and scientific structural design, not only significantly improve the stability of the vehicle during sharp turns, but also optimize the overall comfort of the ride, bringing a smooth and quiet experience for every trip
Stable Load-bearing: Our car spring spacers have a load-bearing capacity of up to 2500 lbs. to support vehicles in their respective weight classes, as well as the ability to raise the body height moderately to a reasonable range to adapt to complex road conditions
Flexible TPE: TPE is used as the main material of car coil spring spacers, which can withstand the continuous pressure of the spring, the bumps and vibrations of the vehicle, and still maintain a good structure after long-term use without brittleness or cracking
Steps to Use: Jack up the vehicle, the wheels need to be suspended, then clean the springs thoroughly, next lubricate the springs and gaskets. Then install the coil spring booster in the order of top side, bottom side until the spring is fully embedded in the spacer, and finally fix the ties

وصف

COIL SPRING SPACERS FOR CARS, NOISE AND VIBRATION DAMPING FOR IMPROVED RIDE COMFORT

Product Attributes
Colors: Red
Sizes:
OD: 6.41 inch
ID: 4.56 inch
Height: 2.37 inch
Track Height: 1.18 inch
Recess Size: 0.6*0.5 inch
Weight: 35.17 oz
Material: TPE
Packaging: Coil Spring Spacer*2, Ties*6

Vehicle Spring Distance Measurement Instructions
1. The vehicle body is in a horizontal state
2. Heavy objects are not allowed to be stored in the car, and no one is allowed to stay in the car

Installation Method
1. Park the vehicle on a level surface, then use a professional jack to lift the vehicle to a fully suspended state
2. Deeply clean the springs before installation, wipe the surface of the springs repeatedly with water
3. Prepare an appropriate amount of bubble water and apply it evenly to the surface of the spring and the groove of the coil spring spacer
4. First fit the upper groove of the coil spring spacer to the spring, and then fix the lower groove until the spring is fully embedded in the groove of the spacer
5. After installation, check the position of the spacer, the opening position should be turned to the center of the inside of the car body. Remember to secure the ties

Product Functions & Features
1. TPE is specially selected as the main material of car coil spring booster, it will not break even under dynamic stress environment for a long time, and it can disperse the stress
2. Our car coil spring spacers can weaken the shock transmission like a "cushion", avoiding the body from shaking sharply, and making the steering smoother when the vehicle turns sharply

مرحبًا،

بحث

النوع ج

مميزات خاصة

وصف

منتجات شبيهه