بحث

بحث

بيت / Pimoroni / الشاشات
شاشة عرض مستديرة عالية الدقة Raspberry Pi من Pimoroni in Kuwait

شاشة عرض مستديرة عالية الدقة Raspberry Pi من Pimoroni

KWD 30
ماركة
Pimoroni
وزن
182 g
الاجهزه الالكترونيات الامريكية قد تحتاج الى محمول فولت من ١١٠ الى ٢٢٠. قد تحتاج إلى محول كهرباء
– 1 +

مميزات خاصة

  • High-speed DPI interface|2.1" IPS (wide viewing angle 175°) display|480x480 pixels minus the corners (~229 PPI)|18-bit colour (262 144 colours)|60 FPS frame rate|Active area: 53.28 x 53.28mm|Capacitive touchscreen (with Python library)|Compatible with all 40-pin header Raspberry Pi models|Display library for Raspberry Pi OS|Python touchscreen library|Dimensional drawing|Pinout|Dimensions: 71.80 x 71.80 x 10.8mm (WxHxD depth includes header and display). With a Pi Zero attached with short standoffs the total depth is 17mm.|HyperPixel uses basically all of the GPIO pins o communicate with the Pi (including the standard I2C pins) so it's not generally possible to use it with other HATs and devices that connect via the GPIO...|...but we have provided an alternate I2C interface broken out on the back that will let you use I2C devices (like sensor breakouts) at the same time as HyperPixel. There are instructions how to set this up in our Hyperpixel 4.0 tutorial (scroll down to the bottom).| Raspberry Pi OS Bullseye includes major changes to how DPI display drivers work - a quick hack to get the screen working (with some loss of rotation/touch functionality) is to comment out dtoverlay=vc4-kms-v3d in boot/config.txt. We're working on full support for Bullseye but if you're after an easy fully featured Hyperpixel experience you should probably stick with Buster for now:Download Raspberry Pi OS Buster with desktopDownload Raspberry Pi OS Buster with desktop and recommended software

وصف

A perfectly round, high-resolution, high-speed 2.1-inch touchscreen display for Raspberry Pi, featuring a crisp IPS display, touchscreen, and high-speed DPI interface. It's compatible with any 40-pin header Raspberry Pi, working particularly well with the Pi Zero footprint. Ideal for custom interfaces and control panels, it's pre-soldered and ready to use. The images are real photos, not renders. Note that standoffs and booster headers are not included. HyperPixel 2.1 Round uses a high-speed DPI interface, offering 60 FPS and 18-bit color. It's capacitive touch, responsive, and multi-touch capable. It works with all 40-pin header Raspberry Pi models, requiring a booster header for full-size Pis. Software installation is straightforward, and it's not yet compatible with Raspberry Pi OS Bullseye.

منتجات شبيهه

{"error":"\u062e\u0637\u0623","cart_limit":"\u0644\u062f\u064a\u0643 \u0627\u0644\u0643\u062b\u064a\u0631 \u0645\u0646 \u0627\u0644\u0645\u0646\u062a\u062c\u0627\u062a \u0641\u064a \u0633\u0644\u0629 \u0627\u0644\u062a\u0633\u0648\u0642 \u0627\u0644\u062e\u0627\u0635\u0629 \u0628\u0643.","prod_limit":"\u0644\u0627 \u064a\u0645\u0643\u0646\u0643 \u0625\u0636\u0627\u0641\u0629 \u0627\u0644\u0645\u0632\u064a\u062f \u0645\u0646 \u0647\u0630\u0627 \u0627\u0644\u0645\u0646\u062a\u062c"}