1. Microprocessor Control: This digital satellite signal finder is microprocessor controlled, which can be very reliable and accurate in displaying the various detection data of satellites, which is very practical.
2. Sensitive Detection: This portable satellite finder is very sensitive and can detect the weakest signals, strong signals (high power satellites, large antennas) can be easily attenuated for better readings.
3. LCD Graphic Display: This satellite finder features an LCD graphic display that shows the various measurement parameters for the selected function It is backlit with LED backlighting, which can be freely turned on or off by the user.
4. Multifunctional: This satellite finder meter can display the (the higher the , the better the signal) via a buzzer, and the signal strength is shown on the LCD display in the form of a thermometer scale and numbers (0‑99).
5. Wide Application: This satellite signal finder has a wide range of applications and can be used for astronomical observation, navigation and positioning, broadcasting work, night camping and so on.

Spec:
Item Type: Satellite Finder meter
Material: ABS
Frequency Range: 950-2150MHz
Power Supply Voltage: 13-18V DC
Input Level Range: -40dBm-10dBm
Operating Temperature: 0-40°C
Impedance: 75 ohms

How to Use:
1. Turn on the satellite , the satellite finder will automatically turn on.
2. Set the antenna to the correct azimuth and elevation angles (related information should be provided with the satellite dish).
3. Adjust the knob until the signal strength shows 0% (threshold point).
4. Slowly move the antenna's azimuth and elevation angles to the signal. The higher the number, the better the signal. If the reading reaches full scale, you can adjust the 'ATT' to lower the input signal. Continue moving the antenna until you get the highest meter reading and the highest possible beeping .
5. Disconnect the wire and readings, then reconnect the LNB or LNBF with the .

packing list:
1 x Satellite Finder Meter
1 x Manual