The problem every painter knows:
Standard plastic sheeting is too stiff for curved body panels. Paint slides down the film and drips. Removal kicks flakes back onto your fresh coat.
JMI BASIC white masking film solves all three.
① Corona Treatment – Paint stays on the film
The surface is restructured at a molecular level so spray paint bonds directly to the film. No sliding. No dripping. No flaking on removal.
② Flexible Film – Follows every curve
Soft, pliable material conforms to door edges, bumper curves, fender arches, and mirror housings without lifting or gapping. One person. One pass. Complete seal.
③ Electrostatic Cling – Sticks on contact
No extra tape needed to hold the film to panels. The electrostatic charge grips the surface automatically, even on vertical and overhead areas.
④ Professional Grade Tape – Built for the Booth
Pre-attached yellow crepe tape is engineered to perform where standard tapes fail.
Tape Specifications:
Tape Thickness: 0.135mm
Adhesive Type: Rubber-based
Adhesion Strength: 4 N/25mm width
Tensile Strength: 90 N/25mm width
Elongation: 9%
Heat Resistance: 80°C / 176°F – 60 minutes
Holds firm through full spray booth heat cycles. Peels off in one clean motion. Zero adhesive residue on panels, trim, glass, or painted surfaces.
What you get:
Corona treated – automotive professional grade
Flexible film conforms to curved body panels
Electrostatic cling grips all surfaces automatically
Heat resistant tape 80°C / 176°F for 60 minutes
Rubber-based adhesive – strong hold, clean release
Zero adhesive residue on all surfaces
Compatible with solvent and waterborne automotive paints
Works for interior painting, construction, and DIY
Tear-resistant and waterproof plastic film
Available in 18", 26", 35", 59", 94" size pack
For professionals and DIYers who won't redo the same job twice.