Product specifications and parameters:
Product Name:Tool Dip Rubber Coating
Main color: Black
Product form: Liquid, self leveling film after brushing/dipping
Single bottle capacity: 150g/5.3 oz
Main components: synthetic rubber mixture
Drying time: about 30-60 minutes (25 ° C, 50% humidity)
Fully cured: 24 hours

Core features of the product:
1.Super anti slip grip: After the liquid rubber solidifies, it forms a layer of high elasticity and high friction surface, significantly increasing the grip strength of the handle and effectively preventing the tool from falling off due to slipping or oil stains.
2.Comprehensive sealing protection: The coating can effectively isolate moisture and prevent oxidation of the tool handle. At the same time, it can also resist scratches and daily wear, extending the service life of tools.
3.Detachable design: The cured rubber layer can be easily peeled off as a whole without leaving any residue, making it convenient for you to replace the tool with a brand new protective layer at any time.
4.Resilient and Flexible: Our rubber coating always maintains excellent flexibility and elasticity, capable of absorbing impact forces, and is not easily cracked under bending and pressure, making it durable and long-lasting.

Instructions for use:
1.Ensure that the surface to be coated is clean, dry, free of oil stains and dust.
2.Before use, please thoroughly stir the liquid in the tank to ensure that it is evenly distributed and of good quality.
3.Dip coating method (recommended): Dip the handle of the tool directly into the liquid, slowly extract it, and let the excess liquid drip back into the can.(or:For large items or items that are not easy to soak, a brush can be used to evenly apply the coating.)
4.Place the coated items in a well ventilated area to dry. The drying time for the watch is about 30 minutes to 1 hour (depending on the ambient temperature and humidity). It takes 24 hours to fully cure and achieve optimal performance.
5.If a thicker coating is required, repeat step 3 for multi-layer coating after the first layer has dried (about 1 hour). Usually 2-3 layers can achieve the desired effect

Precautions
Please work in a well ventilated area and avoid open flames.
Keep the product out of reach of children and pets.
If it accidentally comes into contact with the skin, please rinse immediately with plenty of water. It is recommended to wear gloves during operation.