Warn ing: It is illegal to ride electric scooters on public roads, pavements, or cycle paths. They are intended only for use on private land with for the owner's permission

Customers who buy A or B sets should pay attention: if 9E error occurs after you complete the assembly, it means that your handbrake the controller connection line of the set do not match. Please go to the nearby repair shop to find a professional for adjustment, or purchase the handbrake of this link to use together！！！

Description:
*High-performance 32-bit MCU
*Protection function for abnormal conditions such as overvoltage, overcurrent, overheating undervoltage
*Cruise at fixed speed;Brake energy recovery
*350W 36V 15A Scooter Controller Board Motherboard with Led Display with APP Hover Board Controller
*Suitable for electric scooter complete set replacement
*Speed: The low speed is 15±2km/h; the high speed is 25km/h(maximum）

Instruction:
. Battery display:
33v-36v The first light is long
36v-37v or two lights long bright
37v-38.5v or two lights long bright
38.5v or more,, two, three, four lights
Low voltage alarm: The first light flashes when the battery is below 33V, the buzzer sounds times.
7. Low voltage alarm speed mode: The speed limit is about 15Km/h. When the power returns to 37V,the throttle must return to the initial position to release the low voltage return to normal.
8. Constant speed cruise: The speed is stable for about seconds to automatically start the cruise control after the cruise is fixed, the throttle can be released; press the brake or push the throttle again to release the cruise control and enter the manual mode.
9. Speed: The low speed is 15±2km/h; the high speed is 25km/h(maximum）