Product Parameters
Power: 4KW
Voltage: 220V three-phase
Frequency: 60Hz
Speed: 3400r/min
Flow range: 0-4T/H
Inlet: 51mm (2'')
Outlet: 51mm (2'')
Material: 304 stainless steel
Machine size: 120x80x93cm (47.24''x31.5''x36.61'')
Net weight: About 140kg (308.65LBS)
Operation and Use
1. The cooling water is usually connected before the machine is started, and the cooling water is closed and then can be used.
2. The cooling water pressure is less than 0.2Mpa.
3. The material must enter the working chamber, and the machine can be switched on. It is also necessary to ensure that it does not run in the condition of material failure, so that idling and mechanical sealing are avoided. (A current protector is added when the emulsion pump is connected, so that burnout or the bad influence on the service life is avoided.)
4. A current protector is added when the emulsion pump is connected.
Important Note
After the sealing of the cooling water is confirmed, the motor is started, and the motor steering should be operated according to the steering sign of the main shaft, and the reversal is strictly prohibited!
It cannot be Idle and Reverse!!!!!
Item Number (022813): 1 x High Shear Emulsifying Pump 220V 4KW