Stainless steel eyewash,Upgraded design, with honeycomb bubble form, the built-in multi-layer screen and With protective cover,effectively filter the impurities in the water and make the water flow into the foamed water column, effectively preventing the pollution in the water or causing secondary damage.

Specification:
Product name: Wall-mounted eyewash
Product specifications: wall-mounted
Product material: 304 stainless steel/ABS coating
Working pressure: 0.2-0.4MPA
Sealing pressure: 0.4MPA
Opening method: manual
Eyewash nozzle: 12 liters/min

Installation method:
1. The installation location should be within 15 meters of the accident-prone place, and the flushing place can be reached within 10 seconds at a running speed.

2. Assemble each part as shown in the figure. The joint of each part should be wrapped with sealing tape (such as PTFE tape), and the water pipes and water pipes should be connected according to the diameter of the inlet and outlet

3. After connecting the inlet and outlet pipes, check whether the ball valve switch is in place flexibly and whether there is jamming.

Before use, first open the water inlet control valve
When washing your eyes, please push the eyewash switch push plate clockwise to open the eyewash valve, and pull back the push plate counterclockwise to close the eyewash valve.

Note:
Comprehensive inspections should be carried out more than once a week to check the reliability and effectiveness of the device to ensure emergency and effective use in the event of an accident, and to reliably provide personal safety and health protection. This product is not a device, it only serves as an emergency shower and reduces the damage of harmful substances to the human body.