This epoxy resin putty is a two-component, high-strength structural adhesive. It is designed to solve a variety of complex repair and bonding problems. This putty provides you with the most reliable solution. It perfectly combines component A and component B, achieving strong adhesion through simple mixing.
Instructions for Use:
1. Before use, ensure the surface of the object to be repaired is clean and dry.
2. Next, take out A and B in a 1:1 ratio and vigorously mix them together (mixing time should be no less than 1 minute, until the color is uniform), kneading to the desired shape.
3. Then, fill the repair surface with the mixed adhesive, using clamps for fixation if necessary, and wait 24 hours for it to cure. The cured temperature range is ( ).
Precautions:
1. First, ensure the surface of the object to be treated is clean and dry before using the product.
2. The surface of the object to be treated must not come into contact with water before the product is fully cured.
3. The 1:1 ratio must be used in equal amounts and vigorously mixed; otherwise, it will not cure completely, severely affecting the bonding effect.
4. When not in use, keep sealed and store in a cool, dry place.
5. The mixed adhesive cures in about 2-3 hours at normal ambient temperature; it takes about 4 hours at temperatures below 20 degrees Celsius.