[FITMENT]: The CARORAV tire pressure sensor fit for 2016-2024.06 Mazda CX-3, 2019-2024 Mazda CX-30, 2017-2024 Mazda CX-5, 2022-2024 Mazda CX-50, 2006-2012 Mazda CX-7, 2024 Mazda CX-70, 2007-2019 Mazda CX-9, 2023-2024 Mazda CX-90, 2011-2016 Mazda 2, 2004-2013 Mazda 3, 2019-2024 Mazda 3, 2005-2018 Mazda 5, 2005-2013 Mazda 6, 2018-2024 Mazda 6, 2022-2023 Mazda MX-30, 2006-2008 Mazda MX-5, 2010.03-2015.04 Mazda MX-5, 2018-2024 Mazda MX-5, 2005-2015 Mazda MX-5 Miata, 2018.06-2024 Mazda MX-5 Miata, 2003-2012 Mazda RX-8, 2007-2012 Mazda Speed 3, 2007-2008 Mazda Speed 6, 2016.09-2020 Abarth 124 Spider. Please refer to Product Description for specific application of model and year
[REPLACE PART NUMBER]: BBM237140B, BDGF37140, BHA437140, GN3A37140B, FE0137140A
[PRE-PROGRAMMED]: PRE-PROGRAMMED DO NOT mean the sensor will automatically match your vehicle, it need to require a re-learning/reset operation. And some re-learning/reset procedures may require a professional diagnostic scanner or activation tool
[VERIFY VEHICLE FITMENT]: 1.Check “amazon confirmed fit” at the top of the page to determine the compatibility of your vehicle, 2. Check the matching information related to “APPLICABLE MODELS” on the page, 3. Please feel free to contact us if you have any questions
[ATTENTION]: STOP INSTALLATION if it has no response. Before installation, pls use tpms tool to scan the tpms sensor. If it can't be read or triggered correctly, DO NOT proceed with the sensor replacement installation
[HOW TO RELEARN]: OBDII RELEARN: 1.OBDII connector is required, 2.Confirm TPMS sensors are properly installed, 3.Adjust tire pressures to placard value, 4.Activate TPMS tool on left front tire sidewall next to the valve stem, 5.Repeat for Rf/RR/LR tires, 6.Apply OBD connector to DLC, 7.Tern ignition to ON, 8.Press OK on TPMS Tool to transfer date to ECU, 9.Disconnect OBD connector from DLC, 10.Turn ignition to OFF then start the engine, 11.Drive for at least 5 minutes at 28 mph