for BMW All Models 2000-now

Please make sure your car is Electronic accelerator with plug,
our product not support Mechanical accelerator.

Specifications：
Brand name: ZMShun
LED Display Color: Red
Size about: 2 x 1.2 x 0.23 (in)
Installation: Plug and Play
Function: Enhance car performance
Material : PVC, Silicone and Aluminum alloy

Mode function introduction：
P1 Mode (Comfortable mode)
P1 Mode offers (1 to 9) 9 sensitivity levels, this allows the driver to tune
the controller to the desired level of sensitivity.Choose level 9 .
Maximum performance improvement 25% .

P2 Mode (Sport mode)
P2 Mode offers (1 to 9) 9 sensitivity levels, this allows the driver to tune the
controller to the desired level of sensitivity.Choose level 9 and grip
the steering wheel tight or hit level 1 for a gentle smooth
acceleration.Maximum performance improvement 45% .

P3 Mode (performance mode )
P3 Mode offers (1 to 9) 9 sensitivity levels, this allows the driver to tune the
controller to the desired level of sensitivity.Choose level 9 and grip the
steering wheel tight or hit level 1 for a gentle smooth acceleration.
Maximum performance improvement 65%.

EC Mode (economy mode)
EC mode offers (1 to 9) 9 sensitivity levels, is designed for economy by
reducing the accelerator response time. Also handy when you are on
the trails and looking for a bit more throttle control when
crawling.save fuel 3-8% .

AAA (Automatic mode )
P1 Mode/city mode
P2 Mode/sport mode
P3 Mode/ performance mode
EC Mode/ economy mode

SSS (Manual mode )
P1 Mode/city mode
P2 Mode/sport mode
P3 Mode/ performance mode
EC Mode/ economy mode

Nor Mode (Normal mode)
Brings the vehicle back to standard

Installation :
1. Install this throttle accelerator when the car is power off
Power off your vehicle and remove the key, To avoid a “check engine”light,
ensure your vehicle has been off for 3-5 minutes before removing the pedal plug.
The accelerator plug is normally on top of your pedal.
Carefully unplug the connection from yuor pedal. Take note of the plugs
direction/orientation.

2. Connect the product cable plug into the female plug you have
removed from the pedal,ensure it is in the correct orientation.
Insert the product female plug into the male accelerator plug.

Package included:
1x Electronic throttle controller host
1x Accelerator pedal cable
1x Host cable
1x Manual