31.5'' x 47.24'' Magnetic Whiteboard Sticker
Specifications
Color: White
Material: PVC, Rubber-Mixed Soft Iron Layer
Style: Modern
Shape: Rectangle
Installation Required: Yes
Product Size: 80x120cm/31.5x47.24in
Package Size: 90x8x7.5cm/35.43x3.15x2.95in
Gross Weight: 2.2kg/4.85lbs
Net Weight: 2.09kg/4.61lbs
Included
1 x Magnetic Whiteboard
1 x English Manual
1 x Chinese Manual
Other Accessories for Assembly
Notes
1. Due to the different quality of wall decoration, soft walls are prone to peeling. It is necessary to first test and cut a section of double-sided tape, stick it on a piece of paper, tear off the side with protective film (isolation film), and stick it to the wall, press firmly, and then slowly peel it off the wall to see the removal effect.
2. Double-sided tape should only be applied around the back of the whiteboard, not in the middle! After pasting around, be sure to press firmly to prevent the wall from falling and tearing.
3. If you want to remove this product, you need to slowly peel off the double-sided tape from the wall from a corner, not too quickly, just a little bit by bit.
4. The product may produce an odor after being sealed for a long time, which is a normal situation. Ventilation and odor dispersion are sufficient.
5. The whiteboard can be bent, but cannot be folded. Attention should be paid during installation.
6. Please note that this product does not include notes, photos, memos, or calendars.
7. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.
How to Install
1. First, use a heavy object to press down on the whiteboard and let it sit still for at least 30 minutes.
2. Stick the double-sided tape along the edge of the whiteboard, and then remove the isolation film. (Note: The inner side of the double-sided tape is attached to the whiteboard, and the outer side is attached to the wall.)
3. Finally, stick the whiteboard sticker onto the wall and smooth it out, squeezing out the air to avoid bulging.
How to Remove
1. First, tear out a small corner and grab it with your hand at the closest position between the adhesive surface and the wall.
2. Then slowly tear it off along the wall.