Speed Control
DC5-26V 42 Stepper Motor Drive Control Board 1.2A Motor Forword and Reverse Controller Speed Regulator Limit Pulse Controller
Specification:
Product model: YF-54
Operating voltage: DC5-26V
Output power: 1.2A
Ambient temperature: -20°C to +75°C
Product specification: 81.5*50.5*31mm
Pulse range: 10~99990 pulses
Maximum speed: 250 RPM
Function description: This product can achieve 20/25/35/36/39/42/ micro stepper motor control; For example, reverse rotation; Delay, , limit control, etc
Function introduction
P-1: (click function) Hold down to turn, touch the limit or release to stop.
P-2: (self-locking function) press forward to keep the forward turn, press reverse to keep the reverse turn, release without stopping, touch the limit to stop.
P-3: (limit function) to the forward signal; Stop at limit 1 for X seconds and automatically reverse to stop at limit 2.
(Summary: Give the signal motor from point A to point B and then automatically from point B to point A through limit control)
P-4: (limit control cycle function) power forward rotation; Stop X seconds after encountering limit 1, automatically reverse X seconds after encountering limit 2; Automatic forward turn automatic reverse after stopping at limit 1 for X seconds... An infinite loop.
(To summarize; After power on, the motor circulates back and forth between two points A-B - by limit control)
P-5: Give the forward turn signal, stop the forward turn X Angle, give the reverse signal, stop the reverse X Angle.
P-6: Give the forward turn signal, stop the forward turn at X Angle, and automatically reverse to X Angle to stop after N seconds delay.
(To summarize; The motor ends from point A to point B and from point B back to point A - controlled by pulse Angle)
P-7: Power forward turn X Angle stop, delay N seconds; Automatic reversal to X Angle stop; After N seconds, turn forward again and stop at X Angle... An infinite loop.
(To summarize; After power on, the motor cycles back and forth between two points A-B - controlled by pulse Angle)
P-8: Give the forward turn signal, stop the forward turn at X Angle, after N seconds delay, stop the forward turn at X Angle... Infinite cycle.
(Give the forward turn signal, stop the forward turn at X Angle, delay N seconds, stop the forward turn at X Angle... Infinite loop) The two functions are reversed.
Function setting description
1: Function Settings
Long press the setting key for 2 seconds to enter the function setting mode; Nixie tube display P-1 means enter the function selection mode, press "add/subtract" to select the required function mode.
Refer to P1-P8 functions (Note: functions can be developed according to customer needs)
2: After the function is set, press the setting key to enter the pulse value setting; Press "Add/subtract" to set the pulse value (Note: 1600 pulses of the stepper motor with 1.8 degree step Angle are one circle).
3: After the pulse is set, continue to press the setting key to enter the time value setting, press "Add/subtract" to set the required time value, and press the setting again after setting the time to enter the working mode. This module has its own power off memory function, only need to set the parameter value you need once.
Note:
1.Due to the light and screen difference, the item's color may be slightly different from the pictures.
2.Please allow 1-3cm differences due to manual measurement.
Package includes:
1x Stepper Motor Drive Control Board
==========
Certification : none
Origin : Mainland
Certification : none