Our A1-LRP-BH-7473-42 Lock Release Air Cylinder is a direct replacement for the Bendpak 5502195 part and the BH-7473-42 after-market part.

This Cylinder is for use on BendPak 4-Post Lifts HD Models such as the HD-9ST, HD-12 Series, HDO-12 Series, HD-14 and the SP-7X model and is usually mounted on the inside of the crossbeam. When activated the Cylinder pulls the Safety Locks open to allow the lift to lower.

Included with the Lock Release Air Cylinder are a Heim Joint Eyebolt for the Shaft End, and an Elbow Quick-Disconnect Air Connector for the Anchor End.

Please check the model number of your lift prior to ordering to ensure compatibility.

It is Recommended to Always Replace Both Lock Release Air Cylinders at The Same Time.

For a single Lock Release Air Cylinder, Order Part # A1-LRP-BH-7473-42.

For a set of 2 Lock Release Air Cylinders, Order Part # A1-LRP-BH-7473-42X2.