The M038 charging case is designed as a portable charging and storage solution for compatible smart glasses. It allows glasses to be stored securely while being charged inside the case, making it suitable for everyday use, commuting, and travel.
The case features a USB-C charging port and supports wired charging only. Wireless charging is not supported.
Compatible models include Ray-Ban Meta Wayfarer, Skyler, Headliner, and Oakley Meta HSTN smart glasses.
Product Specifications:
Model: M038 Charging Case
Case Charging Method: USB-C (wired charging only)
Input Current: 1A
Approximate Case Charging Time: About 4 hours 20 minutes
Approximate Glasses Charging Time: About 1 hour 20 minutes
Estimated Glasses Charging Cycles: Approximately 10 times per full case charge
Indicator Light Status (Charging Case Charging, With or Without Glasses Inside):
Orange light: Charging in progress (When the charging cable is connected, the orange light stays on for 10 seconds and then turns off. During the charging process, no light remains on. Once fully charged, the green light stays on.)
Indicator Light Status (Charging Glasses, Without Charging Cable Connected):
Orange light: Charging in progress (When the charging cable is not connected and the case has power, the indicator light will turn orange for 10 seconds after the glasses are placed inside, then turn off during the charging process.)
Green light: Charging complete (Once the glasses reach over 90% charge, the green light will turn on for about 10 seconds before turning off.)
Indicator behavior: When the case is opened with glasses inside, the indicator shows the glasses' battery status. When the case is opened without glasses inside, the indicator shows the case battery status.
Charging Cycle Indicator Reference:
Green indicator: Approximately first 5 full charges for glasses
Orange indicator: Approximately next 5 full charges for glasses
Red indicator: Low remaining power
Factory Reset Instructions for Compatible Smart Glasses:
Power on the glasses and fold both arms
Press the capture button five times
When the LED turns solid orange, press and hold the button for 5 seconds
Release the button once the LED starts flashing
The glasses will reset and restart, which may take up to 30 seconds
After restarting, the glasses will automatically enter pairing mode
Case only. Smart glasses and charging cables are not included unless otherwise stated. This product is not affiliated with or endorsed by any eyewear brand.