TT Motor Description:
This is a TT DC Gearbox Motor with a gear ratio of 1:48, and it comes with 2 x 200mm wires with breadboard-friendly 2.54mm(0.1") male connectors. Perfect for plugging into a breadboard or terminal blocks

TT Motor Parameter:
Rated Voltage: DC 3~6V
Continuous No-Load Current: 150mA +/- 10%
Min. Operating Speed (3V): 90+/- 10% RPM
Min. Operating Speed (6V): 200+/- 10% RPM
Torque: 0.15Nm ~0.60Nm
Stall Torque (6V): 0.8kg.cm
Gear Ratio: 1:48
Body Dimensions: 70 x 22 x 19mm
Wires Length: 200mm 28 AWG
Product Weight: 29g / 1.02oz
Shaft: Dual Shaft

Wheel Parameter:
Center hole diameter: 51mm
Wheel diameter: 65mm
Wheel thickness: 26mm
Product Weight: 26g

L298N Motor Drive Controller Board
Module name : dual H bridge motor drive module
Work mode : H bridge drive (double road)
Main control chip : ST L298N dual H-bridge driver chip
Logical voltage : 5V
Drive voltage : 5v-35v
Logical current : 0mA-36mA
Driving current : 2A(MAX single bridge)
Storage temperature : - 20℃ to + 135℃
Maximum power : 25W

Notes:
1. General Application: When your driver is 7V-12V, you can enable the on-board 5V logic supply.
2. When using the on-board 5V power supply, the + 5V power supply in the interface does not input voltage, but it can draw 5V voltage for external use.
3. Unconventional application of high-voltage drive: When the driving voltage is higher than 12V, less than or equal to 24V, for example, to drive a motor with rated voltage of 18V, the jumper cap with 5V output enabled on-board voltage must be pulled out and then outside the 5V output port Connect 5V voltage to L298N internal logic voltage supply.

Package Includes:
4 X TT Motor DC Gearbox Motor With Wheel
1 X L298N Motor Driver Module