Bohning's Glue-on 5/16” Legend Nock is designed to fit aluminum, wood and fiberglass shafts with swedged ends. This nock has a throat size of .105” (2.67mm) and averages a weight of 11.0 grains (713mg).

Tech tip: To install, simply apply 3-4 drops of Fletch-Tite Platinum, Blazer Bond, or Fletch-Fuse to the Tapered end of the shaft. Using light pressure, twist the nock onto the end of the shaft one full rotation until fully seated. NOT ALL BRANDS OF NOCKS ARE CREATED EQUAL

At Bohning, every nock style must pass the following steps before introduction to the market:

1. Computer simulations identify potential weak points.
2. Destructive testing methods expose possible design flaws or material defects.
3. Accelerated life cycle testing using a custom-built bow is performed at kinetic energy levels exceeding 110 ft-lbs. (nearly twice that of most hunting bows). A single nock must withstand over 1000 shots or it goes back to step 1.
Proudly manufactured at the Bohning Factory in Lake City, Michigan, United States.