مميزات خاصة

Built-in stainless steel is heat-resistant. High-quality 3M tape is used to adhere to the dashboard
Cannot be used on concave or wavy surfaces, can be used on slightly raised surfaces. Texture surface. On a flat and smooth surface, its performance is better
With a diameter of approximately 82MM, it is suitable for most suction cup GPS/phone holders, helping the suction cup adhere firmly to the dashboard.
We strongly recommend that you use a dashboard pad to prevent potential damage to the dashboard caused by suction cups, and to address the issue of suction cups not adhering firmly due to air leakage through the dashboard texture
This product is made of original 3M VHB GPH-160 material, which provides excellent bonding strength even in high temperature environments. It is stronger and more reliable than most standard adhesive pads.

وصف

Universal Compatibility
This 3M adhesive dashboard pad is suitable for all phone suction cup holders and GPS mounting bases with a diameter of less than 80mm.

Dashboard Pad Mounting Instructions

1. Choose the location you would like to apply the disk and clean the dashboard .Remove surface oil stains or dust. And ensure complete drying
2. Remove the paper cover from the dashboard pad.
3. Before installing the suction cup bracket, allow the base pad to cure for 5 hours. It is best to let it cure for 24 hours.
4.Place the suction cup of the base (purchased separately) firmly in the center of the mounting pad, and then press the fixing rod

Note:
* Do not place the mount in or near an air bag deployment zone or where it will obstruct view of the road or hinder vehicle operation. Please mount it on a flat surface.
** Each pad is one-time use only. Once removed, it can not be reapplied.

مرحبًا،

بحث

مميزات خاصة

وصف

منتجات شبيهه