مميزات خاصة

Warm Tip: Note, please read the following information before buying. ① Car backup camera rain shield is not compatible with Mini Cooper, Tesla Model3/y. ② Not suitable for the space above the camera is too narrow, or not a vertical angle plane
Physical Rain Shield: When driving in heavy rain road conditions, the water is very easy to splash to the reversing camera lens, interfering with the clarity of the image, our car rear view camera rain shield for the widening design, as a protective umbrella to intercept the rain
Size: We offer two sizes for you to choose and buy. The total size of our car backup camera rain cover is 3.94*0.91 inch/3.15*0.63 inch, the effective adhesive area is 3.74*0.59 inch/2.8*0.31 inch (adhesive backing part), the low-profile simple design can match the appearance of many vehicles
Soft Silicone: The use of silicone as the main material of rain shield for vehicle backup cameras, has a good temperature adaptability, will not easily soften or lose elasticity, the back of the adhesive backing at the groove structure, you can achieve a tight gapless paste
Quick Installation: ① Clean the mounting surface. ② Tear off the protective film on the backing of the car rear camera rain cover. ③ Warm up the adhesive backing with a hair dryer. ④ Stick the car rear camera rain cover to the corresponding position and press it firmly by hand

وصف

AN UMBRELLA FOR YOUR REVERSING CAMERA

Product Attributes
Colors: Black
Sizes: 3.94*0.91 inch / 3.15*0.63 inch
Effective Adhesive Area: 3.74*0.59 inch / 2.8*0.31 inch (Adhesive Part)
Weight: 0.4 oz / 0.4 oz
Material: Silicone
Packaging: Car Backup Camera Rain Shield*1, Replacement Adhesive Backing*1
Package Size: 4.68*3.9*0.2 inch

Warm Tips
1. Attention, please check the size and effective adhesive area of the product carefully before buying
2. It is not suitable for flat surfaces where the space above the camera is too narrow or not at a vertical angle
3. Not compatible with Mini Cooper, Tesla Model3/y, etc
4. Please check if there is enough space at the camera location to install the protective cover

Precautions for Sticking
1. Before sticking, pay attention to clean the installation surface
2. If necessary, you can use a hair dryer to warm up the adhesive backing to improve adhesion
3. Be careful not to touch the adhesive position with water within 24 hours after installation

Product Functions & Features
1. The car backup camera rain shield adopts wider design, blocking most of the water droplets splash path, less rain on the imaging clarity of the impact
2. Adopting silicone as the main material of car rear camera rain cover, it will not be deformed and stick at high temperature or brittle and broken at low temperature, so it can be used for a long time

مرحبًا،

بحث

مميزات خاصة

وصف

منتجات شبيهه