قرص تثبيت لوحة القيادة لقاعدة تثبيت الهاتف ونظام تحديد المواقع وكاميرا لوحة القيادة مقاس 3.25 بوصة طول مدمج من الفولاذ المقاوم للصدأ، وسادة لاصقة ناعمة ومقاومة لدرجات الحرارة العالية، مجموعة مكونة من قطعتين

KWD 4.500

ماركة
DIGFAD: فئة
ملحقات الهواتف الذكية الأخرى: وزن
20 g

أسلوبعدد 2 (عبوة من 1)

مميزات خاصة

Built-in thin stainless steel。 this material is renowned for its flexibility, high heat resistance, and damage resistanc
It can adhere to almost all types of leather, various textures, and slightly curved surfaces
With a diameter of approximately 82mm, it is suitable for most suction cup GPS devices, phone holders, and dashcams.
We strongly recommend that you use a dashboard pad to prevent potential damage to the dashboard caused by suction cups, and to address the issue of suction cups not adhering firmly due to air leakage through the dashboard texture
After attaching the adhesive disc pad, press firmly on each section for about 10-15 seconds to ensure a secure bond between the disc and the dashboard.

وصف

Universal Compatibility
This 3M adhesive dashboard pad is suitable for all phone suction cup holders and GPS mounting bases with a diameter of less than 80mm.

Dashboard Pad Mounting Instructions

1. Choose the location you would like to apply the disk and clean the dashboard .Remove surface oil stains or dust. And ensure complete drying
2. Remove the paper cover from the dashboard pad.
3. Before installing the suction cup bracket, allow the base pad to cure for 5 hours. It is best to let it cure for 24 hours.
4.Place the suction cup of the base (purchased separately) firmly in the center of the mounting pad, and then press the fixing rod

Note:
* Do not place the mount in or near an air bag deployment zone or where it will obstruct view of the road or hinder vehicle operation. Please mount it on a flat surface.
** Each pad is one-time use only. Once removed, it can not be reapplied.

مرحبًا،

بحث

مميزات خاصة

وصف

منتجات شبيهه