SCT Male to Female Thread T-Ring Adapter, Telescope Thread Converter Conversion 2inches-24TPI to M45.4*1mm

Adapter ring to convert the thread on the rear cell of many telescopes to an SCT thread. Allows you to use SCT threaded diagonals, visual backs, focal reducers and other accessories on your telescope. Has female threads on the inside all the way through and male SCT threads on the outside at single end.

Overall length: 12mm.
Knurled Grip: 2mm
SCT External Thread: 10mm / 2inches-24TPI
Internal Thread: M45.4*1mm
Flange Distance: 2mm

Note:
Please allow 0-2mm error due to manual measurement.
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!

Please note:
On some telescopes, the focus knob is positioned very close to the rear tube. When using 2-inch accessories with this adapter ring, the focus knob may obstruct tightening. Measure the clearance between the focus knob and your intended 2-inch accessory to ensure SCT accessories can be securely attached to the telescope using this adapter ring.
Also note: This adapter is not compatible with telescopes that do not use standard Mak 45.4mm threads. Before purchasing, be sure to measure your telescope's thread diameter to ensure the adapter will fit.