الاجهزه الالكترونيات الامريكية قد تحتاج الى محمول فولت من ١١٠ الى ٢٢٠.قد تحتاج إلى محول كهرباء
مميزات خاصة
Precision Deburring: This optimized Carbide blade geometry ensures rapid removal of burrs. And tools with carbide tips maintain a sharper cutting edge better than steel tools. Generally produce a better finish when cutting, providing a cleaner and smoother cut.
Chamfer: This makes it easily shaves down the outer edges of a screw/bolt/pipe/rod and remove the burr. Effortlessly shave edges of screws, bolts, and pipes while protecting hands from strain.
Easy Operation: Start by tightening the screws/bolts, starting at the lowest speed, gently applying pressure to remove the burr and increasing the speed as needed. Keep the drill bit aligned until fully disengaged to avoid slippage. Otherwise, the drill bit will hit the screw/bolt and become difficult to contro.
Multi-Material Compatibility: This applies to mild steel, aluminum, hard steel, copper, brass, fiberglass, wood, and hard plastics. It can also be used for some stainless steel screws/bolts but you need to be careful. Caution: Stop if excessive noise occurs.
Universal Fit: Compatible with 1/4" to 3/4" fasteners.
وصف
Our chamfering tool drill bit has chosen tungsten carbide blades, Carbide is a material that is much superior to other high-speed steel materials used in similar product
Hard alloy cutting tools have good wear resistance, They can also withstand temperatures much higher than steel, Hard alloy cutting tools are better able to maintain sharp cutting edges than steel cutting tools
They usually produce better smoothness during cutting, providing cleaner and smoother cuts, Hard alloy cutting tools are cleaner, faster, and have a longer lifespan
It is widely used in stainless steel, low-carbon steel, hardened steel, aluminum, copper, brass, fiberglass, wood, and plastic
ريشة البلاط والبلاط من بوش
KWD 4.500
مجموعة لقم مثقاب الماس الجاف، 8 قطع منشار ثقب للجرانيت والسيراميك/البلاط والرخام والبناء والحجر والزجاج والبلاستيك الصلب (ليس للخشب)، ساق مستديرة 3/16 بوصة 1/4 بوصة 5/16 بوصة 3/8 بوصة 1/2 بوصة (8 قطع قطع ماسية)
KWD 2.500
قطع حفر أساسية من الماس الجاف الملحوم بالليزر 2-1/4 بوصة لقطع الخرسانة والإسفلت، قطر 2-1/4 بوصة × 11 بوصة طول
KWD 23
رقاقة Master Ice augers مقبض التجميع
KWD 6.500
