Specification:
Item Type:Air Sander
Material: Stainless Steel
Model: at-1500h60
No-load speed: 15000 (rpm)
Product size: approx. 16.5 x 4.5 x 9.5cm/6.5 x 1.8 x 3.7in
Air inlet size: approx. 0.6cm/0.25in
Compressed Air Flow: 8cfm
Exhaust direction: rear exhaust
air connection screw: 1/4-19npt
Noise Value: Less than 83db
Suggested air tube inner diameter: approx. 6.3mm/0.2in
Category: Oscillating Pneumatic Eccentric Sander
Restocking Tips:
1. This machine is highly accurate. When it is working, the speed is high. Once any fine sand or iron files enter the movement, it can cause the blade to break and make the machine work, so make sure the air intake is clean.
2. Be sure to use an oil separator and drain regularly to ensure the machine is dry.
3. Before use every day, add 3~5 drops of pneumatic oil to the machine air intake and connect the air pump to idle.
need to know to exchange:
1. Locate the keyhole.
2. Insert the positioning pin into the lock hole and keep the pin still.
3. Turn right and replace the sand pad. File
1 x Location Location
1 x 1/4 Air Inlet Connector