This super glue accelerator spray forms an invisible "grip layer" on the surface, significantly increasing the surface area and chemical activity, allowing subsequent coatings to adhere more securely and longer. Whether you're applying it professionally or doing it yourself, you'll achieve a longer-lasting, professional-looking finish.
Instructions
1. Ensure the surface to be treated is clean and dry.
2. Shake the bottle thoroughly for 20-30 seconds before use.
3. In a well-ventilated area, spray a thin, even layer of the spray from a distance of 15-20 cm, covering the entire surface.
4. Allow the spray to dry for approximately 1-2 minutes to fully react with the substrate.
5. Once completely dry, you can immediately proceed with painting, taping, or applying glue.
Precautions
1. This spray does not inherently bond; glue or paint is required for adhesion.
2. Use only in a well-ventilated area (such as a balcony or workshop) to avoid inhaling vapors or spray. Wearing a mask and gloves is recommended.
3. Store in a cool, dry place away from direct sunlight.
4. When using on unfamiliar materials for the first time, test compatibility and effectiveness on a small, inconspicuous area.