Newly Power Wheel Adapter
You can use it to upgrade your power wheels, Rc toys, Robotics, DIY etc. First, you need install the battery into the connector, then easily connect it to your devices.

NOTE: Blows or Pops Up Fuses !
We use the "30A"(current for usual use) fuse is for warning and protecting your device and battery from being damaged by excessive current.
If the fause blows or pops up when you using our adapter, it might be that the instantaneous current passing through your device is greater than 30A.

Warning:
1. The power of the input power supply must be greater than 1.5 times the rated power of the motor to make the motor work (note: the input voltage and the rated voltage of the motor must be consistent).
2. Before the wiring is powered on, please read the wiring label clearly, the input is DC, the positive and negative poles can not be mistaken, remember! ! ! The output connection to the motor (motor) does not need to be positive or negative. If the running direction is wrong, please exchange the two wires of the motor.

Specification:
Applicable voltage range: DC 7-80V (80V is the highest working voltage, please leave a margin)
Drive current: max. 30A (The working voltage and high current are relatively reduced, please use it with the power)
Control power (recommended):
-- 12V: within 300W
-- 24V: within 400W
-- 48V: within 450W
-- 60V: within 500W
Duty cycle adjustable range: about 1% -100%
PWM frequency: 12KHz
Shell size: 9*5.9*3.4cm

Package includes:

1 x Power Wheel Adapter with 14 gauge wire
1 x DC PWM Motor Speed Controller 12 gauge wire
3 x 30A Power Wheel Adapter fuse
1 x Power Wheel Adapter Wire Terminal
1 x DC PWM Motor Speed Controller 30A Fuse