Link belt can be installed on pulleys to get rid of the clattering of an old machine. Be sure to roll on the pulley with tips of the belt point to the inside, it won't work when installed reversely.
These V belts offer freedom to adjusting length and replacing failed sections. A lot effort can be saved if you use needle nose pliers to do it. Then they can be rolled onto a drive just like a bicycle chain.
To re-tension, just roll the belt off, take out a link and roll it back on
These link belts are more expensive than regular V belts. If price is not a problem, you'll find these out-perform the conventional belts in every aspect.
High rate Wear resistance, oil resistance, chemical resistance, waterproof. anti steam, resist cold and high temperature.
Description
A link belt is a link belt. Far superior to the rubber belts, and have better results with it, these belts are meant to make comprehensive improvement on lathes, table saws, band saws and other woodworking related pulleys. Be sure to roll on the pulley with tips of the belt point to the inside, it won't work when installed reversely. Thanks to the fast connect feature of link belts, When a unit breaks, it's a snap to replace that unit and get the belt fixed, while a normal rubber belt gets dry or ripped, it's gone for good. So these are actually more cost effective. High performance polyurethane elastomers reinforced with multiple plies of polyester fabric, these belts make a world of difference in the smoothness of the drives.
Type: The vast majority of woodworking tools use A-section or Z-section belts. Just check your pulleys are one of Z Type compatible before purchasing.
Longer belt life
Easier & faster installation
Size of Z Type: 3/8 inch by 5 feet.
Item will be packed in durable pe bag.
