Attributes:
* Thread Size: M1.4 x 0.3 (Right Hand)
* Square Shank Width: 2mm / 0.08"
* Thread Length: 9mm / 0.35"
* Overall Length: 40mm / 1.57"
* Accuracy: H2
* Material: Cobalt High Speed Steel (HSS-CO)
* Finish: Titanium Coated
* Flutes Quantity: 3 Flutes

What Is Included:
* 1 Piece x Thread Milling Taps

Applications & Features:
--- Suitable for threading through holes or shallow holes. 3 straight flutes design, rapid downward chip removal. Make new female threads or re-thread damaged female threads in stainless steel, ordinary steel, copper, aluminum, iron, alloy steel, hard plastic. Machine taps are used in tapping machines, vertical drilling and milling machines. M1-M3.5 micro taps process wood and soft metals with lower hardness, mainly used in clocks and watches.
--- The high speed steel tool with 5%-8% cobalt has higher hardness, higher strength, better toughness and wear resistance, and heat resistance. Titanium (TiN) coating greatly improves hardness and wear resistance, reduces friction coefficient. The tapping depth should not be over 1.5 times the diameter of the tap (eg: diameter=6mm (M6), maximum tapping depth=9mm). Drill holes with a twist drill before tapping. The tapping angle should be 90 degrees vertical and stable.

Useful Tips:
--- Control speed based on material hardness. Feed rate (recommended): ordinary steel (copper aluminium alloy): 6-15m/min; hard steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min. The higher the hardness, the slower the speed. Fast speed and low torque; slow speed and high torque. When tapping plastic, add lubricating coolant. For steel, motor oil is generally used, and vegetable oil is used for high requirements. Use No. 30 motor oil for stainless steel.